Qos Setup - TRENDnet 12dBi User Manual

N300 wireless 12dbi outdoor 5ghz poe access point
Hide thumbs Also See for 12dBi:
Table of Contents

Advertisement

TRENDnet User's Guide
Application) from drop-down list. When you select ICMP or Layer 7
Application , the Local(LAN)/ Destination Port cannot used.
If you want to block websites with specific URL address or using specific
keywords, enter each URL or keyworks in the "URL Blocking" field and click
"Add" button to add in the URL Blocking list of each rule. Click "Remove"
button can remove URL or keywords.
Local Port : Specify local port(LAN port) range required for this rule
Destination Port : Specify destination port range required for this rule
Active : Check Enable button to activate this rule, and Disable to deactivate.
Click "Add" button to add control rule to List. There are 10 rules maximum allowed in
this Control List. All rules can be removed or edited on the List. Click Reboot button to
activate your changes.
© Copyright 2012TRENDnet. All Rights Reserved.

QoS Setup

Quality of Service (QoS) refers to both a network's ability to deliver data with minimum
delay, and the networking methods used to control the use of bandwidth. Without QoS,
all traffic data is equally likely to be dropped when the network is congested. This can
cause a reduction in network performance and make the network inadequate for time-
critical application such as video-on-demand.
A classifier groups traffic into data flows according to specific criteria such as the source
address, destination address, source port number, destination port number or incoming
port number. For example, you can configure a classifier to select traffic from the same
protocol port (such as FTP) to form a flow.
Shaping
WAN
NAT
TEW-676APBO
Download: 1024K
Upload: 256K
Download: 512K
Upload: 256K
Download: 2048K
Upload: 1024K
LAN
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-676apbo

Table of Contents