10/11/05 11:29:49 32KYJE00_108
Rear Wheel Removal
1.
Support the motorcycle securely, raise
the rear wheel off the ground.
2.
Loosen the drive chain lock nuts ( ) and
drive chain adjusting nuts ( ).
3.
Remove the rear axle nut ( ).
4.
Remove the drive chain ( ) from the
driven sprocket by pushing the rear
wheel forward.
(3)
(1) Drive chain lock nuts
(2) Drive chain
adjusting nuts
98
5.
Remove the rear axle shaft ( ), side
collars and rear wheel from the swingarm.
1
Do not depress the brake pedal while the
2
wheel is off the motorcycle. The caliper
3
piston will be forced out of the cylinder with
4
subsequent loss of brake fluid. If this occurs,
servicing of the brake system will be
necessary. See your dealer for this service.
(2)
(2)
(4)
(1)
(1)
(4) Drive chain
(5) Rear axle shaft
(3) Rear axle nut
5
(3)