Rear Brake - Yamaha YZ250(V) Owner's Service Manual

EC5A8100

REAR BRAKE

30 Nm (3.0 m•kg, 22 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
1 Master cylinder removal
Extent of removal:
Extent of removal
Preparation for
removal
1
1 2 3
3
FRONT BRAKE AND REAR BRAKE
2 Nm (0.2 m•kg, 1.4 ft•lb)
Order Part name
REAR BRAKE REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Rear wheel
Drain the brake fluid.
1 Brake pedal
2 Master cylinder
3 Brake hose holder
4 Union bolt
5 Brake hose
6 Pad pin plug
7 Pad pin
8 Caliper
30 Nm (3.0 m•kg, 22 ft•lb)
3 Nm (0.3 m•kg, 2.2 ft•lb)
2 Brake hose removal
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "FRONT WHEEL AND
REAR WHEEL" section.
Refer to "REMOVAL POINTS".
1
1
2
2
1
1 Remove when loosening the pad pin.
1 Loosen when disassembling the caliper.
1
5-11
CHAS
18 Nm (1.8 m•kg, 13 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
3 Caliper removal
Remarks