Yamaha YZ250(R)/LC Owner's Service Manual page 288

CLUTCH AND PRIMARY DRIVEN GEAR
5. Install:
9 Friction plate 1
9 Clutch plate 2
NOTE:
9 Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
9 Apply the transmission oil on the friction plates
and clutch plates.
6. Install:
9 Bearing 1
9 Plain washer 2
9 Circlip 3
To push rod 1 4.
NOTE:
Apply the lithium soap base grease on the bear-
ing and plain washer.
7. Install:
9 Push rod 2 1
9 Push rod 1 2
NOTE:
9 Apply the transmission oil on the ends of the
push rod 2.
9 Install the push rod 2 with its smaller end a
toward you.
8. Install:
9 Pressure plate 1
9. Install:
9 Clutch spring 1
9 Screw (clutch spring) 2
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
4-38
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)