Table of Contents
Advertisement
SECTION 3—SAFETY INSPECTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear and
should be replaced.
❑ Ensure the hand brakes do not interfere with the tires when rolling.
Inspect/Adjust Periodically
❑ Ensure the transport chair rolls straight (no excessive drag or pull to one side).
❑ Inspect the seat and the back upholstery for rips or sagging.
❑ Ensure that there is no excessive side movement or binding when the rear wheels are lifted and spun.
❑ Ensure the wheel bearings are clean and free of moisture.
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear and
should be replaced.
❑ Ensure that casters are free of debris.
❑ Inspect the tires for flat spots and wear.
❑ Ensure the hand brakes are easy to engage.
❑ Clean the upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
Troubleshooting
Chair
Sluggish Turn
Veers
or Performance
Left/Right
X
X
Maintenance
Maintenance Safety Precautions
After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is
tightened securely. Otherwise, injury or damage can result.
DO NOT overtighten the hardware attaching to the frame. This could cause damage to the
frame tubing.
Transport Chairs
Casters
Flutter
X
X
X
CAUTION
CAUTION
Squeaks
Looseness
and
in
Rattles
Chair
X
X
WARNING
CAUTION
14
Chair 3
Solutions
Wheels
Check for loose fork stem nuts and
Check that both casters contact
the ground at the same time.
bolts.
Part No.1125095
Advertisement
Table of Contents
