Jenn-Air 30" (76.2 CM) Installation Instructions Manual page 22

9. Locate the oven orifice hood at the back of the oven cavity.
10. Using an adjustable wrench, turn the Number 49 Natural gas
oven bake burner orifice hood counterclockwise to remove.
A. Number 49 Natural gas oven bake burner orifice hood
11. Install the orange Number .047 LP gas oven bake burner
orifice hood, turning it clockwise 4 or 5 turns. Do not
overtighten.
A. Orange .047 LP orifice hood
12. Position the oven bake burner over the oven bake burner
orifice hood and reinstall using 2 screws.
A
A. Oven bake burner
B. Oven bake burner orifice hood
13. Reinstall orifice hood cover.
14. Reinstall the access panel.
22
Replace Oven Bake Burner Cover
1. Replace oven baffle and tighten 2 wing nuts.
2. To replace oven bake burner cover, insert tabs of cover into
slots in oven back. Replace and tighten 2 screws at the front
of the oven.
A
To Convert Oven Broil Burner
1. Remove oven broil burner screw and set aside.
2. Remove the oven broil burner from the oven broil burner
orifice hood. The oven broil burner will hang in the back of the
oven while changing the orifice hood.
3. Turn the 1.42 mm Natural gas oven broil burner orifice hood
counterclockwise to remove.
B
A. Slots in oven back
A
B
A. Oven broil burner screw
B. Oven broil burner orifice hood
A. 1.42 mm Natural gas oven broil burner orifice hood
A
A