Built-In Oven - GE JKP90 Installation Instructions Manual

Installation Instructions
Cutout for 27"
A
with Microwave models only
For JKP90 model only.
27" (68.6 cm)
Cutout Width
25" (63.5 cm)
Allow 1" (2.5 cm)
25 1/4" (64.1 cm)
for overlap of oven
over side edges
of cutout
Allow a minimum of 20"
(50.8 cm) for clearance
to adjacent corners,
drawers, walls, etc.
when door is open
20" (50.8 cm)
Allow minimum
1" (2.5 cm) for
overlap of oven
top and bottom
of cutout
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. The
runners and braces must support
255 lbs (115 Kg).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
5" (12.7 cm)
Max. from the
left or right
Cabinet Junction Box
side
Location
Width
Min.
Max.
2" x 4"
Cutout
(5 cm x
Height
10 cm) or
41 1/8"
equivalent
(104.5 cm) Min.
runners level
41 1/4"
with bottom
(104.8 cm) Max.
of cutout
Alternate Junction Box
Location (access from
adjacent cabinet may
be required)
Recommended cutout
location from floor
21 5/8" (54.9 cm)

Built-In Oven

(68.6 cm)
Cabinet Width
Recommended
Cutout Location
from Floor
Cutout Depth
Cutout Width
35" (88.9 cm)
Min. Above
base rail
Cutout Height
NOTE: If the cabinet does not
5" Min.
have a front frame and the sides
(12.7 cm)
are less than 3/4" (1.9 cm) thick,
shim both sides equally to
establish the cutout width.
4
27" (68.6 cm)
21 5/8" (54.9 cm)
23 1/2" (59.7 cm)
25" (63.5 cm) Min.
25 1/4" (64.1 cm) Max.
41 1/8" (104.5 cm) Min.
41 1/4" (104.8 cm) Max.
2" x 4" (5 cm x 10 cm)
or equivalent runners
level with bottom of
cutout
24" (61 cm) 24"
18"
18"
(45.7 cm)
27"
27"
(68.6 cm)
NOTE: If using equivalent
runners, then the center of the
equivalent runners should be
20 1/2" (52.1 cm).
2" x 4" or
Equivalent
Runners