HP Surestore Tape Library Model 2/28 User Manual page 79

Table 4-9 Information Logs (Continued)
Log entries for HARD
ERROR *, SOFT
ERROR *, RECOVERY
ERROR *
(continued)
An asterisk before the
log name indicates
that pressing
ENTER
when an error number
is displayed provides
more information.
NOTE Micro-move error codes are described on page 4-26.
Log Name
SOURCE #
DESTINATION 1 #
DESTINATION 2 #
ODOMETER #
*MICROMOVE 1 #
*MICROMOVE 2 #
*MICROMOVE 3 #
*MICROMOVE 4 #
*MICROMOVE 5 #
*MICROMOVE 6 #
*MICROMOVE ER #
Retrieving Performance Information
Displays
The element number to which the source
refers. (Valid for MOVE, EXCHANGE, and
POSITION movements only.)
The element to which the first destination
refers. (Valid for MOVE and EXCHANGE
movements only.)
The element to which the second destination
refers. (Valid for EXCHANGE movement
only.)
The move number in which the error
occurred.
The first library micro-move for the original
move command issued prior to the failure.
The second library micro-move for the
original move command issued prior to the
failure.
The third library micro-move for the original
move command issued prior to the failure.
The fourth library micro-move for the original
move command issued prior to the failure.
The fifth library micro-move for the original
move command issued prior to the failure.
The last library micro-move for the original
move command issued prior to the failure.
The actual micro-move error that occurred.
Library Operation
4-35