HP Surestore Tape Library Model 10/180 Configuration Manual page 16

14 Configuring the Host System
Repeat this step for lpath 10/4/4.1, 4.2, 4.3, and 4.4.
e. To configure the Storage Node on the NetWorker server,
verify the ldev specifications:
io> Idev 30/34
LDEV: 30 DEVNAME: OUTDEV: 0 MODE:
ID: HPA4669A RSIZE: 128 DEVTYPE: MOSAR_AC
PATH: 10/4/4.0.0 MPETYPE: 24 MPESUBTYPE: 4
CLASS:
LDEV: 31 DEVNAME: OUTDEV: 0 MODE:
ID: DLT8000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.1.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
...
LDEV: 34 DEVNAME: OUTDEV: 0 MODE:
ID: DLT8000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.4.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
7. Save the configuration changes as follows:
a. Hold the configuration changes:
io> hold
b. Exit the io section:
io> exit
c. If you have followed the local convention for backing up the
configuration file, keep the changes:
sysgen> keep
keeping to group CONFIG.SYS
Purge old configuration (yes/no)?y
Check with the system administrator to ensure you
CAUTION
can keep the changes to the configuration file.