Ce Configuration Requirements - HP NetServer AA 4000 Release Note

CE Configuration Requirements

Release 4.0 CEs must be configured identically, and must contain identical chipset versions to
avoid loss of CE synchronization when various system management tools are used. In
particular, the Add/Remove Hardware Wizard, Device Manager, and System Information tools
may cause the CEs to lose synchronization unless all of the following conditions are met:
Element
CE processors
CE BIOS revision
CE BIOS settings
CE add-in cards
CE RAM
Endurance Release Notes for Release 4.0 Service Pack 1
Table 2 CE Configuration Requirements
Requirement
Must have the same model, stepping, and cache configurations.
Must match.
All configurable BIOS options must be identical (for example, serial and
parallel port settings, etc.).
Card slot placements must match.
The same DIMM slots must be occupied by DIMMS of the identical
manufacturer, type, and size.
3