Assembling Your Cleaner; Using Your Cleaner - Hoover FREESPACE TFS 7208 User Instructions

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

ASSEMBLING YOUR CLEANER

Remove the cleaner and accessories form their packaging. Please dispose of the
packaging material in a safe and conscientious way.
Insert the hose end into the cleaner, ensuring it clips and locks into position. To
release: simply press the two buttons on the hose end and pull (P1).
Fit the hose/handle and floor nozzle onto opposite ends of the telescopic tube (P2
& P3). The accessory tools can be stored on the tool holder fixed to the telescopic
tube (P3).

USING YOUR CLEANER

Power supply - Pull cord and plug into power supply (P4). Please make sure the
cord is fully extended before using the cleaner. Press the on/off pedal once to start
the cleaner (P5). Press it again to stop the cleaner before removing the plug after
use. Press the cord rewind button to wind the power cord back into the cleaner
(P6).
Fixed power control (depending on model) - Adjust the suction by moving the
handle valve: suction will decrease when opening the valve (P7). Use low suction
for delicate fabrics.
Variable power control (depending on model) - Slide the variable power
adjuster to increase or decrease the suction (P8). Use low suction for delicate
fabrics.
Telescopic Tritube – The telescipic Tritube can be extended or collapsed by
pressing the latches forward and pulling or pushing the tubes to the desired length
(P9).
Carpet & Floor Nozzle - Press pedal on the nozzle to lower the brush head when
cleaning hard floors (P10). Press the pedal again to lift the brush head when
cleaning carpets.
Mini Turbo Nozzle (depending on model) - Use the mini turbo nozzle (P11) for
deep cleaning on textile surfaces. Important: do not use the Mini Turbo Nozzle on
rugs with long fringes, animal hide and with carpet piles deeper than 15mm. Do
not keep the nozzle stationary while the brush is rotating.
Multifunction Tool - (P12) This tool can be used as:
1.
Crevice tool: for corners and hard to reach areas
2.
Dusting brush: for bookshelves, frames, keyboards etc.
2
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Freespace cyclonic

Table of Contents