User Checklist - Hoover FREESPACE TFS 7208 User Instructions

To remove the cyclonic cassette Hepa filter:
1. Remove the cyclonic cassette (see Emptying the cyclonic cassette).
2. Unlatch then unhinge the filter panel from the bottom of the cyclonic cassette (21).
3. Press the release latch on the blue filter frame to unlock the hepa filter from the
filter panel (P22).
4. Remove the washable hepa filter.
To remove the Purefilt filter:
1. Unlatch and remove exhaust filter cover (P23)
2. Remove the washable exhaust filter.
Removing a blockage from the system - If the check indicator is illuminated:
" Check if the cassette is full. If so refer to 'Emptying the cyclonic cassette'.
" If the cassette is empty but the indicator is illuminated:
1. Do the filters need cleaning? If so refer to 'Cleaning the washable filters'.
2. Check if there is any other blockage in the system - Use a rod or pole to remove
any blockage from the extension tube or flexible hose.
Warning -The cassette check indicator will remain illuminated if the cleaner is used
when the cassette is full, if there is a blockage or if the filters are dirty. If used for a
period of over ten minutes with the cassette check indicator illuminated, an electronic
cut out will switch the cleaner off to prevent any risk of overheating. If this should
happen, switch the cleaner off, unplug and correct the fault (see ' Removing a
blockage from the system'). The cut out will automatically reset upon switching the
cleaner back on.

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist
before calling your local Hoover service.
• Is there a working electricity supply to the cleaner? Please check with another
electrical appliance.
• Is the cyclonic cassette over-filled? Please refer to 'Cleaner Maintenance'.
• Is the filter blocked? Please refer to 'Cleaner Maintenance'.
• Is the hose or nozzle blocked? Please refer to 'Removing a blockage from the
system'.
4
GB