Setup and Reset
Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed.
(Range: 0 – 50 seconds)
NOTE
A warm-up time that is too short may damage the product due to overvoltage.
Setting
Power On Adjustment
m
1. Press [
] on the product.
2. Move to
Setup
using the [
] buttons. Next, press the [
3. Move to
Power On Adjustment
using the [
The following screen will appear.
Power On Adjustment
4. Adjust the
Power On Adjustment
setting using the [
] button.
] buttons. Next, press the [
] button.
Power On Adjustment
Power On Adjustment
:
0
Adjust
Return
] buttons.
Advanced Settings
Configures the settings more elaborately.
Configuring
Fan & Temperature
m
1. Press [
] on the product.
2. Move to
Setup
using the [
] buttons. Next, press the [
3. Move to
Advanced Settings
using the [
4. Move to
Fan & Temperature
using the [
The following screen will appear.
Fan Control
Fan Speed Setting
Temperature Control
Current Temperature
Move
•
Fan
Control: Selects auto or manual for the fan speed settings.
•
Fan Speed
Setting: Sets the fan speed within a range of 0 and 100.
•
Temperature
Control: Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77 °C by default.
NOTE
•
The picture will be dimmed if the temperature exceeds the specified temperature, and the product
will automatically power off to prevent overheating if the temperature keeps rising.
•
It is best to use the product at temperatures 75 - 80 °C (based on ambient temperature of 40 °C).
•
Refer to "Specifications" herein for details about operating conditions.
•
Current
Temperature: Shows the current temperature of the product.
5. Set the temperatures using the [
] buttons.
] button.
] buttons. Next, press the [
] button.
] buttons. Next, press the [
] button.
Fan & Temperature
Fan & Temperature
: Manual
: 3
: 77
: 60
Enter
Return
36