Philips HP6582 User Manual page 11

guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide
guarantee leaflet.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliances. If you are unable to solve the problem
with the information below, contact the Consumer Care Centre in
your country.
Problem
The epilator
does not
work.
During use,
the epilator
suddenly
stops
operating.
Then the
speed lights
flash red for
5 seconds
Possible
cause
The socket
used to
charge the
epilator does
not work.
The overload
protection
has been
activated.
Solution
Make sure the socket you use to
charge the epilator is live. The charging
light goes on to indicate that the
epilator is charging. If you connect the
epilator to a socket in a bathroom
cabinet, you may need to switch on
the light in the bathroom to make sure
the socket is live.
If you press the epilating head too hard
onto your skin or when the rotating
discs of the epilating head get blocked
(for instance because a piece of
clothing has got stuck between the
epilating discs), the epilator switches off
automatically. Then the speed lights
flash red for 5 seconds. Turn the
epilating discs with your thumb until
you can remove whatever is blocking
the epilating discs. Then switch on the
epilator again.
EnglIsH
11