HP 9000 EPS20 Installation Manual page 16

K class enterprise servers

Hide thumbs Also See for 9000 EPS20:

Table of Contents

Introduction

Stabilizer Block (Chock Block)

The stabilizer block (or chock block) is used to prevent the system cabinet from being inadvertently

moved around. The block can be placed under either the front or rear wheels.

1. Position the stabilizer block at the desired location for the system cabinet.

2. Roll the system cabinet onto the stabilizer block until the front (or rear) wheels fall into the notch in

the stabilizer block.

Table of Contents

Show Quick Links

Table of Contents