HP 9000 EPS20 Installation Manual page 12

K class enterprise servers

Hide thumbs Also See for 9000 EPS20:

Table of Contents

Introduction

Standard Console, Keyboard, and Optional UPS

(K250/K260/K360/K370/K380/K450/K460/K570/K580)

1. Connect the standard console data cable to the "Console" port on the system core I/O card.

2. Plug the standard console power cable into a UPS power receptacle.

3. Connect the keyboard cable to the keyboard connector on the system core I/O board.

4. Connect the mouse cable to the connector labeled "MOUSE" on the system core I/O board.

5. Connect data cable between the system I/O board, UPS connector and the UPS data connector UPS.

NOTE

Do not plug the UPS into a power receptacle at this time.

Table of Contents

Show Quick Links

Table of Contents