HP ProCurve 6120G/XG Manual page 143

Syntax:
ProCurve (config)# show port-access mac-based config
Port Access MAC-Based Configuration
MAC Address Format : no-delimiter
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Client Client Logoff
Port Enabled Limit
----- -------- ------ ------ ------
1 No 1
2 Yes 1
...
Figure 3-34. Example of show port-access mac-based config Command Output
show port-access mac-based config [port-list]
Displays the currently configured MAC Authentication
settings for all switch ports or specified ports, including:
• MAC address format
• Support for RADIUS-assigned dynamic VLANs (Yes or
No)
• Controlled directions setting for transmitting Wake-on-
LAN traffic on egress ports
• Authorized and unauthorized VLAN IDs
If the authorized or unauthorized VLAN ID value is 0, the
default VLAN ID is used unless overridden by a RADIUS-
assigned value.
Re-Auth
Moves Period Period
-------
No 300 0
No 300 0
Web and MAC Authentication
Configuring MAC Authentication on the Switch
Unauth Auth
VLAN ID VLAN ID
-------- -------
0 0
0 0
Cntrl
Dir
----
both
in
3-59