Clusterpack Install Quickstart - HP 1032 Manual

ClusterPack Install QuickStart

ClusterPack Install QuickStart
Index | Administrators Guide | Users Guide | Tool Overview | Related Documents | Dictionary
1.0.1 How Can I Get My HP-UX Cluster Running?
Step Q1 Fill Out the ClusterPack Installation Worksheet
Step Q2 Install Prerequisites
Step Q3 Allocate File System Space
Step Q4 Obtain a License File
Step Q5 Prepare Hardware Access
Step Q6 Power Up the Management Server
Step Q7 Configure the ProCurve Switch
Step Q8 Copy the License Files to the Management Server
Step Q9 Install ClusterPack on the Management Server
Step Q10 Run manager_config on the Management Server
Step Q11 Run mp_register on the Management Server
Step Q12 Power up the Compute Nodes
Step Q13 Run compute_config on the Management Server
Step Q14 Run finalize_config on the Management Server
1.0.1 How Can I Get My HP-UX Cluster Running?
If you have installed ClusterPack before, follow the instructions in this section as a quick
reminder. You can refer to the detailed instructions for any given step via the links provided.
If you have not installed ClusterPack before, use the Comprehensive Install Instructions
section instead. This QuickStart Guide does NOT cover the use of Golden Images. If you
wish to use Golden Images, use the Comprehensive Install Instructions section instead.
Note:
If you do the installation steps out of order or omit steps, your installation
will leave your systems in an unknown and non-deterministic state.
Back to Top
ClusterPack