Check The Status Of A Submitted Job - HP 1032 Manual

Using the Clusterware Pro V5.1 Web Interface:
Set a priority at submission by:
From the Jobs Tab, select Job->Submit.
Using the Queue pull down menu, select a queue with a high priority.
After submission:
From the Jobs Tab, select the job from the current list of pending jobs.
Select Job->Switch Queue.
Switch the job to a queue with a higher priority
The relative priority of the different Queues can be found on the "Queue Tab".
Using the Clusterware Pro V5.1 CLI:
% bmod -sp <priority> <job_ID>
% bswitch <desintationqueue> <job_ID>
References:
3.7.8 How do I access the Clusterware Pro V5.1 Web Interface?
3.7.9 How do I access the Clusterware Pro V5.1 Command Line Interface?
Back to Top

2.1.7 Check the status of a submitted job

Using the Clusterware Pro V5.1 Web Interface:
From the Jobs tab:
Select Tools->Find.
On the Find dialog enter:
Click Find.
Using the Clusterware Pro V5.1 CLI:
% bjobs <job_ID>
% bjobs -l <job_ID>
Select ID from the Field list.
Select = from the Condition list.
Enter the Job ID in the Value field.