Advertisement
Connect Your DIRECTV Plus HD DVR To Your Home Network
WIRELESS CONNECTION
A wireless connection uses your own wireless router and a wireless transceiver to send data from your DSL/cable router to the
DIRECTV Plus HD DVR. Please be advised that DIRECTV does not recommend using a wireless device, because it may not
®
provide the best experience. For the best digital entertainment experience, the better options are Wired and
Powerline. However if you prefer to use Wireless, you must follow the manufacturer's directions on configuring your Wireless
device. These instructions will help you to make the right connections to your DIRECTV Plus HD DVR.
Along with the requirements listed on page 2, you will need:
A
Wireless
Transceiver that uses an Ethernet Port to
connect to a media device.
A Wireless Router (in place of a regular router).
Step 1
Connect one end of an Ethernet cable to the LAN port on the back of the wireless transceiver.
Step 2
Connect the other end of the Ethernet cable to the DIRECTV Plus HD DVR jack
labeled ETHERNET.
(Note: You may have one or two Ethernet ports, depending on your model.
If you have 2, use the TOP Ethernet port.)
Step 3
Verify that You are Connected!
Go to your
DIRECTV Plus HD DVR:
Press Menu On Your DIRECTV Remote>
Select Help & Settings>
Select Setup>
Select Network>
Choose Connect Now
If your HD DVR immediately recognizes the network connection
you will receive this Congratulations screen.
(See Figure A.)
If your HD DVR does not immediately recognize the network
connection, you will get the option to choose your
Connection method. You should choose Wireless.
(See Figure B.)
Network Your DIRECTV Plus HD DVR -
®
®
QUICK START GUIDE
®
®
Ethernet Cable
Wireless
Transceiver
®
Figure A
Figure B
HD DVR
Ethernet cable
connects to the LAN port
of the wireless transceiver.
Ethernet cable
plugs into HD DVR.
6
Advertisement
