Toshiba B-SX5T SERIES Owner's Manual page 46

2. PRINTER SETUP
2.9.1 Parameter Setting
(Cont.)
NOTE:
When the installed print head type is
changed, this parameter should be
also changed accordingly. Failure to
do this may affect the print quality or
print head life.
(30) Print Head Type Selection
This parameter is to choose the print head type that is actually installed.
When "<2>PARAMETER SET" appears, press the [PAUSE] key until
the following display appears.
<2>PARAMETER SET
THERMAL HEAD
Use the [FEED] or [RESTART] key to select a desired option.
[RESTART]
[FEED]
After selecting a print head type, press the [PAUSE] key.
E2-32
ENGLISH VERSION EO1-33059
2.9 Setting an Operating Environment
V2
THERMAL HEAD V1
THERMAL HEAD V2
Current type
(TPH128R4)
Enhanced type
(TPH128R5)