Whirlpool SDRY60 Operation Manual page 17

Cleaning the door airproof strip
Remove the lint with a soft brush or a wet cloth.
Be careful not to damage the
Remove any remaining lint from the lint screen
on the door at the same time.
Note: The door airproof strip must be cleaned
before or after each use, or the dryer
may be aleak from the door in the
operation.
Cleaning the lint in the exhaust conduit
1. Remove the outlet cover or the exhaust
grill in the trunk.
2. Take off the filter.
3. Clean the lint on the Sensor inner
exhaust conduit with a tool.
4. Clean the lint in the area of the
conduit with a
Note: If there is too much lint in the
result in inefficient drying, it must be cleaned periodically.
CLEANING AND MAINTENANCE
airproof
exhaust
soft brush from the hole.
strip.
the
exhaust conduit, it could
15
hole