Adjusting Or Replacing Brushroll; Replacing Edge Brush; Using An Oreck Scented Tablet - Oreck XL3 User Manual

Powerful, lightweight upright vacuum uk version
Hide thumbs Also See for XL3:
Table of Contents

Advertisement

Maintenance
E
N

Adjusting or Replacing Brushroll

WARNING:
Unplug Power Cord from electrical socket before servicing.
To determine if the brushroll is worn, place a firm object with a straight edge across the opening
in the base of the vacuum. If the brushroll bristles do not extend evenly beyond the baseplate and
touch the straight object then the brushroll should be adjusted.
Remove the baseplate by removing 5 Philips screws and then remove the belt and brushroll
16
17
from the Housing.
18
19
To adjust the brushroll, rotate the ends of each brushroll so that the 'OLD' setting is uppermost (19).
The 'OLD' setting is smooth and has no grooves along the edge. The 'NEW' setting has several
grooves along the edge (18) and on a new brushroll this should be facing uppermost.
Note:
Both ends of the brushroll have 'OLD' and 'NEW' setting positions marked. Only one
end is marked on the outside edge, as indicated in illustrations 18 and 19.
Refit the belt.
15
Refit the baseplate.
16
If a previous adjustment has already been made and bristle height does not extend above the
baseplate, a new brush assembly should be ordered or a Service Kit (SERKIT35G).
IMPORTANT: Both brushroll ends must be set to the same setting. The right and left side
must be both 'NEW' or both 'OLD'. Unmatched settings can cause damage to the unit.
16
Replacing Edge Brushes
WARNING:
Unplug Power Cord from electrical socket before servicing.
Turn the Power Head over. With baseplate facing up, remove the 5 recessed Philips screws. Once
removed, turn over the baseplate to see the Edge Brushes, each secured with a single screw. Remove
both Edge Brushes and replace with the new ones. Refit baseplate.
Using an Oreck Fresh Air
Your ORECK XL vacuum cleaner has a special Oreck Fresh Air
This pocket is located inside the outer cloth bag in the area where the disposable dustbag attaches
to the intake tube. Insert tablet in pocket if desired.
G
L
I
S
H
Brushroll End Position
for a NEW brushroll
17
Scented Tablet
®
7
Brushroll End Position
for an OLD brushroll
18
19
Scented Tablet pocket.
®
.

Advertisement

Table of Contents
loading

Table of Contents