HTC 6900 User Manual page 104

104 Exchanging Messages
To configure MMS message settings
1. Tap Start > Messaging > SMS \ MMS.
2. Tap Menu > New > MMS.
3. Tap Menu > Options > Message Options. The Settings screen then
appears.
4. In the Preferences tab, select or clear the provided check boxes
according to your needs.
5. Tap the Servers tab and
check if your device is
preset with MMS server
settings.
If there are no preset
settings, tap New and
enter the following
information, which you
can get from your other
wireless service provider:
•
•
•
•
•
•
6. Tap OK.
Note
Gateway. Location of the MMS server, which is usually in the form
of an IP address.
Port number. HTTP port number used for connecting to the MMS
server and for file transfer.
Server address. URL address of the server where MMS messages
are stored.
Connect via. Select the connection that your device uses for MMS
messages.
Sending size limitation. Select the maximum MMS message size
allowed by your wireless service provider.
WAP version. Select either WAP 1.2 or WAP 2.0, depending on
which one is being used by your other wireless service provider.
• If your device already has preset MMS settings, it is recommended that
you do not change these settings. If you change the preset settings, your
device may not be able to send and receive MMS messages.