Toshiba LX810 series User Manual page 116

Description
Target Path
Option
Default
Function Key Setting Launch TOSHIBA Function Key utility.
Display
This tab lets you customize your computer's display settings for either the
internal display or an external monitor.
Power On Display
This option allows you to select the display to be used when the computer
is started. Please note that this setting is only available on standard VGA
mode and is not available as part of the Windows Desktop properties.
Auto-Selected
System LCD Only
Boot
This tab allows you to modify the boot settings.
Boot Priority Options
This option allows you to set the priority for booting the computer. Click the
Up and Down buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.
2.
User's Manual
Hold down F12 and boot the computer. Release the F12 key one
second after the computer is power on.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
If your computer does not load the Boot menu, please refer to the
Troubleshooting section.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
Input description for the application that you want
to assign to.
Click Browse..., select the application you want
to assign, and then click Open.
Input startup parameters.
Restore button support settings to factory default.
Selects an external monitor if one is connected
and the display panel is closed. otherwise, it
selects the internal display.
Selects the internal LCD, even if an external
monitor is connected.
5-11