To Set The Resolution - HP 34401A User Manual

Chapter 1 Quick Start

To Set the Resolution

To Set the Resolution
You can set the display resolution to 4
optimize measurement speed or noise rejection. In this book, the most
significant digit (leftmost on the display) is referred to as the "
since it can only be a "0" or "1."
Press the Shift key.
Selects 4
The resolution is set to 5
interface reset.
The resolution is fixed at 5
You can also vary the number of digits displayed using the arrow keys
(however, the integration time is not changed).
Fewer
Digits
Resolution is local to the selected function. This means that you can
select the resolution for each function independently. The multimeter
remembers the resolution when you switch between functions.
1 2 , 5 1 2
1
digits.
2
1
Selects 5 digits.
2
1
digits ( most noise rejection ).
Selects 6
2
1 2
digits at power-on and after a remote
1 2
digits for continuity and diode tests.
More
Digits
, or 6 1 2 digits either to
1 2 " digit,
1
21