Dell PowerEdge UCS-71 User Manual page 14

When adding a 6 Gbps SAS HBA or Internal Tape Adapter, remove the
blank filler bracket on the back of the system aligned with the PCI-e slot
you have selected.
NOTE:
system's Hardware Owner's Manual.
5 Align the controller with the PCI-e slot you have selected.
6 Insert the controller in the PCI-e slot. See Figure 3-1.
NOTE:
Figure 3-1 displays the 6 Gbps SAS HBA, but the installation instructions
in this section are common for the 6 Gbps SAS HBA and Internal Tape Adapter.
Figure 3-1. Installing a 6 Gbps SAS HBA
1
bracket screw
3
PCI-e slot
14
Hardware Installation
For more information about your system's PCI-e slots, see your
3
1
2
6 Gbps SAS HBA
2