HP Wireless USB Network Adapter hn215w Quick Start Manual page 6

Note:
The network name is also known as SSID,
BSSID, or ESSID. Refer to the settings of your
wireless access point or gateway for your
network name. If you are using an HP
Wireless Gateway or HP Wireless Network
Access Point and have not changed the
default, the network name (SSID) is
"hpinvent".
8 The Identify Settings: Security screen
appears. If you have not enabled WEP
encryption on your access point or gateway,
leave the security settings as Off (default).
If you have enabled WEP encryption, select
On (Alphanumeric key) or On
(Hexadecimal key). Then enter the WEP
encryption key in the boxes provided.
Note:
If you are using an HP Wireless Gateway
and have enabled WEP encryption, select
On (Hexadecimal key). The encryption
key can be found on the wireless tab of the
Gateway Control Panel. See the user's guide
on the HP Wireless Gateway (hn200w)
4
Filename: QS Wireless LAN PC Card.doc Title: HP-Print2k.dot
Template: HP Quick Start.dot Author: Rob Heiret Last Saved By: Elizabeth Stoneburg
Revision #: 79 Page: 4 of 13 Printed: 09/17/01 10:58 AM
CD-ROM for information about the Gateway
Control Panel.
The Encrypt data with selection is
automatically set as Key 1. If you have
designated a different key for your network,
select the appropriate key from the drop-
down list.
Then click NEXT.
9 The Identify Settings: Advanced Settings
screen is displayed. This screen enables you
to turn the PC Card power management on
or off. Power management slightly reduces
card performance in exchange for enhanced
battery life of the laptop computer. (See the
documentation on the CD-ROM for more
information.)
Power Management is automatically set to
Off (default). To turn on power
management, select On.
After making a selection, click NEXT.