How To Clean The Filter - Daewoo DWF-450 Instruction Manual

HOW TO CLEAN THE FILTER

Cleaning the Lint Filter
1 Pull the filter frame upward. 2 Turn the lint filter inside
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
1 Pull the power
plug out before
cleaning it.
Cleaning the drain filter
• In case of "Pump-Model" drain hose, this filter's equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ..
• If the drain filter is not cleaned at proper time (every 10 times of use), drain problem could
be caused.
1 Put down the remained
water in the hose. And
put a container under the
filter to collect water.
4 Clean the drain filter
removing the foreign stuffs.
out, wash the lint off
with water.
Lint Filter
2 Turn off the water
supply to the
washer and
Separate the inlet
hose.
2 Turn the cap counter
clockwise.
5 Put the filter into the case.
And turn the cap to adjust
the prominence of the filter
to the hole of the case.
13
3 Return the filter as it was,
and insert the filter frame
into the slot.
Filter Frame
3 Pull the inlet filter
out.
3 Pull out the filter assembly
off the case.
6 Turn the cap clockwise
tightly.
4 Remove the dirt
from the inlet
filter with a brush.