Using Power-On Functions - Epson Stylus COLOR 800 User Manual

Using Power-On Functions

The functions below (in italics) are available if you hold down the
corresponding control panel buttons while turning on the printer:
-
LQ self test =
Checks the paper length and prints a self-test at 360 dpi. See "Self testing"
on page 10-4.
Draft self test =
Checks the paper length and performs self-test printing at 180 dpi. See
"Self testing" on page 10-4.
Default setting =
Enters the default-setting mode. See "Changing the Print Settings" in this
chapter.
-
Hex dump =
Prints the data sent from the computer in hexadecimal code. See "Hex
dump mode" on page 10-6.
Print head alignment =
Enters the print head alignment mode. See "Aligning the Print Heads " on
page A-11 for details.
A-14
Using the Printer with DOS
load/eject button
;
cleaning button
:
cleaning button
:
load/eject +
-
load/eject +
cleaning buttons
;
cleaning buttons