Loading a cartridge
1.
Lift the cartridge door and insert the cartridge into the slot in the front of the drive with the white
arrow uppermost and facing the drive door.
1. Arrow indicates leading direction
3. Cartridge door
Figure 28 Inserting a cartridge
.
2.
Apply gentle pressure until the drive takes the cartridge and loads it. (See
"Inserting a
3.
The Ready light flashes green while the drive performs its load sequence. When the cartridge is
loaded, the Ready light shows steady green.
Unloading a cartridge
CAUTION:
Never try to remove a cartridge before it is fully ejected.
cartridge" on page 45.)
2. Label area
4. Ready light
Ultrium Half-Height SAS Tape Drives
45