Sas Cable Supplied With Lto-5 Ultrium 3000 Tape Drives; Sas Cable Supplied With All Other Ultrium Tape Drives - HP StorageWorks User Manual

1. Mini-SAS connector to server
2. SAS connector to tape drive
3. Power connector to server's power supply
Figure 9 SAS cable supplied with LTO-5 Ultrium 3000 tape drives
.
The SAS connector on the cable supplied with all other HP StorageWorks Ultrium tape drives does
not provide power. There is a separate power connector on the rear of the tape drive.
1. Mini-SAS connector to server
2. SAS connector to tape drive
Figure 10 SAS cable supplied with all other Ultrium tape drives
.
NOTE:
The cable supplied with the tape drive is suitable for connecting to a mini-SAS (SFF-8086/8087)
connector on a dedicated HBA or on the server's SAS controller. If your server has a SAS 4i connector
(SFF-8484), a suitable cable is available, but must be purchased separately, see
https://www.hp.com/go/connect.
4. Unused second branch on supplied cable
5. Tie wrap
6. Cover on unused SAS connector
3. Unused second branch on supplied cable
4. Tie wrap
5. Cover on unused SAS connector
Ultrium Half-Height SAS Tape Drives 25