Generalmusic 271221 Owner's Manual page 151

NOTE VALUES
This menu allows you to change both the velocity and the pitch
of any notes in the selected track.
First select the track you want to change by pressing it's track
select button. You should see the name of the selected track in
the top right side of the display.
Next, specify which part of the track you want to change, (from
measure X to measure Y), by setting the values under the RANGE
button, (F1). You can also use this function to set a specific range
of notes to be edited. Notes which fall outside the specified range
will not be affected by the operation.
Press ENTER when you've finished.
Adjusting velocities: There are two different ways to adjust the
velocity of the selected notes
NORMAL: When this is set, use the VELOCITY CHANGE pa-
rameter to select how much you want to increase
or decrease the current velocity values by. To set a
decrease simply choose a negative value.
FIXED : Choosing this setting will automatically convert all
velocity values in the selected track to the value
of VELOCITY CHANGE .
Press ENTER to complete the operation.
Adjusting pitch: Set the TRANSPOSE value to the number of
half steps you want the selected notes to be shifted by. You can
Sequencer 11•19