be loaded into the exact same location in the RAMFILE.
2.
Press ENTER while the cursor is on the name of the
single element in the right side of the display. It will open
a new window where you can specify a new location in
the RAMFILE for it to be loaded into.
Non Equinox files
When a non-native disk is inserted into the drive, (for example a
MIDI file or sample disk from another company), the Equinox
should recognize the disk and, if it contains compatible files, the
instrument should automatically lead you to the right area to load
them.
After inserting the disk and choosing LOAD, check to see if any
files are displayed in the right side of the display. If they are,
move the cursor to the appropriate file name on the right and
press ENTER. If you do not see any files at first, you can explore
the disk by using ENTER to open any folders that you see on the
left. Any files contained in these folders will appear on the right.
If you have problems, either seeing files on an "alien" disk or
reading the disk at all, try going into SAMPLE environment and
reading the disk using LOAD, (F1).
Disk 8•7