Generalmusic 271221 Owner's Manual page 107

If you haven't stored anything into the instrument then the only
folder you should see is SYSTEM. If you have already stored
something, you will see a screen similar to the one shown here:
This "directory tree" is where you specify exactly what you want
to save. Taking a little time to really understand how it works will
be of great help to you and may spare you unnecessary head-
aches in the future.
Notice that, at the moment, in the lower left side of the screen,
the words SAVE ALL currently appear.
Since the cursor is currently over the word RAMFILE, pressing
ENTER now would tell the machine that you want to save all of
the RAMFILE, (in other words, saving everything which is cur-
rently in the instrument's memory).
Now move the cursor down so that it covers the first folder be-
neath RAMFILE. Pressing ENTER at this stage would tell the
machine that you want to save all of the contents of the current
folder, (in other words, saving all of the SONGS or all of the PER-
FORMANCES without saving anything else).
You'll also notice that you can now see something on the right
side of the display. The selected folder, on the left, is open and
the information you see on the right side is the contents of this
now open folder. This allows you to be even more specific about
what you want to save.
Move the cursor over to the right side and you'll notice that the
wording at the lower left changes to SAVE SINGLE.
Pressing ENTER at this stage would tell the machine that you
want to save only the item which is currently selected in the right
Disk 8•3