■
Dialling Stored DTMF Numbers
To call a number stored in a memory location:
1 Press the
•
"A" appears on the display.
2 Enter the desired memory location number (1 ~ 9).
•
The stored digits are displayed.
3 Press the PTT switch.
•
If programmed by your dealer, no DTMF tone will
sound when "D" is transmitted. "D" is used for a
pause time. The pause duration is programmed by
your dealer.
■
Clearing Stored DTMF Numbers
To clear the numbers from a memory location:
1 Press the # key twice.
•
"D- CLR" appears on the display.
•
To cancel the process, press any key other than
1 ~ 9.
2 Enter the desired memory location number (1 ~ 9).
■
Redialling
You can redial the last number you transmitted (16
digits maximum).
1 Press the
•
"A" and the digits are displayed.
2 Press the PTT switch.
Switching OFF the transceiver power clears the redial
Note:
memory.
key.
key, then press the 0 key.
17