Placing A Call; Receiving A Call - Kenwood TK-270G Instruction Manual

■

Placing a Call

1 Make sure no parties are currently transmitting on
your selected channel.
2 Press the PTT switch and speak into the
microphone in your normal speaking voice.
• For best sound quality at the receiving station, hold
the microphone approximately 1.5 inches
(3 ~ 4 cm) from your mouth.
3 Release the PTT switch to receive.
■

Receiving a Call

Your dealer may have programmed QT or DQT
signalling on your transceiver. If your selected
channel is programmed with one of these features,
you will hear calls only when another party in your
system makes a call. All other calls will not be
heard.
If your selected channel is not set up with QT or
DQT, you will hear calls made by any party (not just
those in your system).
12