Public Address - Kenwood TK-5710 Series Instruction Manual

• None
No function has been programmed on the key.
• Operator Selectable Tone
Refer to "Q
UIET
• OST Down
Press this key to decrease the Operator Selectable Tone number of your
selected channel.
• OST Up
Press this key to increase the Operator Selectable Tone number of your
selected channel.
• Playback
Refer to "vgS-1 OPTIONAL vOICE gUIDE & STORAgE UNIT" on page 37.
•

Public Address

Press this key to toggle the Public Address function ON and OFF. "PUBLIC
ADRS" appears on the display when Public Address is activated. To use the
Public Address system, your dealer must first install an external speaker. This
function causes all audio input via the microphone to be amplified and output
from the external speaker.
• Regroup Request
Press this key to send a request to the dispatcher to join the talkgroup set up
by the dispatcher. While using the dynamic group, "Dyn. Regroup" appears on
the display.
• Scan
Refer to "SCAN" on page 5.
• Scan Delete
Refer to "T
EMPORARY
• Scan Program
Refer to "S
CAN
• Scrambler/ Encryption
Refer to "SCRAMBLER (FM)/ ENCRYPTION (P25)" on page 26.
• Scrambler/ Encryption Code
Refer to "SCRAMBLER (FM)/ ENCRYPTION (P25)" on page 26.
• Selcall
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" on
page 9.
• Selcall + Status
Refer to "FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION" on
page 9.
• Send the GPS data
Press this key when the GPS unit has been installed to send your positioning
data to the base station.
T (QT)/ D
ALk IgITAL
C L
hANNEL OCkOUT
P
" on page 7.
ROgRAMMINg
Q T (DQT)" on page 28 for details.
UIET ALk
" on page 5.
33