Scrambler (Fm)/ Encryption (P25); S Ecure (E Ncrypted ) T Ransmission; S Electing The S Crambler C Ode (Fm); S Electing The E Ncryption K Ey (P25) - Kenwood TK-5710 Series Instruction Manual

Vhp p25 transceiver; uhf p25 transceiver
Hide thumbs Also See for TK-5710 Series:
Table of Contents

Advertisement

SCRAMBLER (FM)/ ENCRYPTION (P25)

Note:
◆ The Scrambler function can be used only in Conventional FM Operation. Additionally, the
Voice Scrambler board must be installed before this function can be activated.
◆ Ask your dealer for details concerning the Voice Scrambler board and the Encryption DES/AES
settings.
S
(e
ecure
ncrypTed
Press the key programmed as Scrambler/ Encryption to switch the transceiver
to secure (encrypted) transmission.
• The
(KCH-4) or
• Pressing the microphone PTT switch after the Scrambler or Encryption function has
been turned ON encrypts the transmitted signal.
• Each group member must activate their respective Scrambler/ Encryption functions to
descramble the received signals.
S
S
elecTing The
crAMbler
1 Press the key programmed as Scrambler/ Encryption Code or press and
hold the key programmed as Scrambler/ Encryption for  second, to enter
Code Selection mode.
2 Press the GRP
decrease the Scrambler code.
• There are 6 available Scrambler codes ( ~ 6).
• Each group member must use the same code in order for the transceivers to
descramble the received signals.
3 Press the PF 1, PF 2, or PF 3 key to exit Code Selection mode.
S
e
elecTing The
ncrypTion
1 Press the key programmed as Scrambler/ Encryption Code or press and
hold the key programmed as Scrambler/ Encryption for  second, to enter
Key Selection mode.
2 Press the GRP
Encryption key.
• There are 6 available Encryption keys ( ~ 6).
• When a call is received, the transceiver will descramble the call as long as the
received code is in the encryption list.
3 Press the PF 1, PF 2, or PF 3 key to exit Key Selection mode.
Note: To return the transceiver to the default programmed Encryption key, select "PRESET".
However, if you delete the Encryption key {page 27}, it will not be recovered.
26
) T
rAnSMiSSion
(KCH-5) icon appears on the display.
OPT
c
(FM)
ode
keys or rotate the CH control to increase or
and
K
(p25)
ey
and
keys or rotate the CH control to select the new

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uhf p25 transceiver tk-5810

Table of Contents