Update Your Phone; Before Updating Your Firmware - Samsung SPRINT SM-N900P User Manual

1. Connect your phone to your computer using the supplied USB/charging cable. You may
need to remove the USB cable from the Charging Head.

Insert the smaller end of the cable to the USB Charger/Accessory jack at the bottom
of the phone.

Insert the larger end of the cable into an available USB port on your computer.
2. Your phone will automatically detect the connection. When
swipe your finger down from the Status bar to open the Notification panel.
3. On the Notification panel, the type of connection is shown:

Connected as a media device: Used for most transfers. You can transfer files in
Windows or from a Mac.

Connected as a camera: Used for transfers of photos using camera software on
your computer.

To change the connection type, tap it in the Notification panel to open the Storage
settings > USB Computer Connection option, and then tap the desired option. If
your phone is connected to a computer with a USB 3.0 port, you can choose to use
USB 3.0 here.
Note: USB 3.0 speeds up data transfers, but it may sometimes interfere with calls or data when
it is in use. If you choose to use a USB 3.0 connection, it will automatically turn off after 10
minutes of inactivity, and will switch to USB 2.0.
4. On your computer, navigate to the detected phone (such as through the My Computer
menu) and open it.
5. If available, select a drive (Card for an optional installed memory card (not included), or
Phone for internal phone storage).
6. Select a folder (for example, Music for songs and albums) and copy files to it from your
computer.
7. When you are done, disconnect your phone from the computer.

Update Your Phone

From time to time, updates may become available for your phone. Use System update options
to update your phone's internal software.

Before Updating Your Firmware

Updating your phone firmware will erase all user data from your phone. You must back up all
critical information before updating your phone firmware.
Tools and Calendar
appears in the Status bar,
130