Pointing Device; Touch Pad - Toshiba R10 User Manual

Smart Card
For further information, please refer to Chapter 3,
Options.
Problem
Smart Card error occurs Remove the Smart Card from the computer,

Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.

Touch Pad

Problem
On-screen pointer does
not respond to pointing
device operation
Double-tapping does
not work
The on-screen pointer
moves too fast or too
slow
User's Manual
Procedure
make sure to confirm that the card oriented
correctly and reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to
the documentation supplied with your Smart
Card for further information.
section in this chapter, and the documentation supplied with your
Procedure
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click
3. Set the pointer speed as required and click
Panel -> Hardware and Sound -> Mouse icon.
the Buttons tab.
click OK.
Panel -> Hardware and Sound -> Mouse
icon.
the Pointer Options tab.
OK.
Troubleshooting
Hardware, Utilities and
USB
8-12