GE 6100 Series Data Manual page 17

Remote Thermostat Control Selection Chart For Zoneline Packaged Terminal Units
Zoneline Series Thermostat Model
4100
6100
Thermostat wire size – up to 60 feet AWG20 – up to 66 feet AWG18
For remote thermostat operation follow the steps below:
1. Turn on the unit and ensure it is working properly
BEFORE proceeding.
2. Unplug the unit or disconnect power and remove
the room cover.
3. Connect the thermostat wiring per the appropriate
diagram/colors for your model.
4. Plug the unit back in or reconnect power.
5. Press the Aux Set button once. The letters AU will
appear in the display.
6. Press the mode button until the number "6" appears
in the left hand digit.
7. Press the up arrow once so the top half of the right
hand digit is lit.
8. Press the Aux Set button to exit the setup function.
9. Replace the room cover.
See pages 12 and 13 for full instructions on using the
Auxiliary Controls Feature.
Type
RAK164D1 Digital
RAK164P1 Digital Programmable
RAK148D1 Digital
RAK148P1 Digital Programmable
Function Low-Voltage Conductors
Cooling and Heating
Single-Stage Cooling –
2-Stage Heating
geappliances.com
5
5
6
6
17