Sony Ericsson R800x Extended User Manual page 51

To enable Wi-Fi® network notification
Make sure Wi-Fi® is turned on.
1
2 From the Home screen, tap
3 Find and tap Settings > Wireless & networks > Wi-Fi settings.
4 Mark the Network notification checkbox.
To scan for Wi-Fi® networks manually
1 From the Home screen, tap
2 Find and tap Settings > Wireless & networks > Wi-Fi settings.
3 Press .
4 Tap Scan . The phone scans for Wi-Fi® networks and displays them in the Wi-Fi
networks section.
5 Tap a Wi-Fi® network in the list to connect to the network.
Advanced Wi-Fi® settings
Before you add a Wi-FI® network manually, you need to turn on the Wi-Fi® setting in your
phone.
To add a Wi-Fi® network manually
1 From the Home screen, tap
2 Find and tap Settings > Wireless & networks > Wi-Fi settings.
3 Tap Add Wi-Fi network.
4 Enter the Network SSID for the network.
5 Tap the Security field to select a security type.
6 If required, enter a password.
7 Tap Save.
Contact your Wi-Fi® network administrator to get the Network SSID name and Wireless
password.
To view detailed information about a connected Wi-Fi® network
1 From the Home screen, tap
2 Find and tap Settings > Wireless & networks > Wi-Fi settings.
3 Tap the Wi-Fi® network that you are currently connected to. Detailed network
information is displayed.
Wi-Fi® sleep policy
By adding a Wi-Fi® sleep policy, you can specify when to switch from Wi-Fi to mobile data.
If you are not connected to a Wi-Fi® network, the phone uses mobile data connection to access
the Internet (if you have set up and enabled a mobile data connection in your phone).
To add a Wi-Fi® sleep policy
1 From the Home screen, tap
2 Find and tap Settings > Wireless & networks > Wi-Fi settings.
3 Press .
4 Tap Advanced .
5 Tap Wi-Fi sleep policy.
6 Select a Wi-Fi sleep policy to use.
Using a static IP address
You can set up the phone to connect to a Wi-Fi® network using a static IP address.
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
.
51