4.2.3.Monitoring method of pulse input command
The pulse input command frequency can be monitored.
In order to monitor the pulse input command frequency, set up the monitor display in the
frequency command value [Unit: Hz/free unit].
The pulse input command frequency can be confirmed even before the motor is used.
Initial value can be confirmed for the combination testing.
For setting method of the condition monitor, refer to the inverter instruction manual in the
"monitoring operation condition" section.
5.External View
External view of PGFB board / Unit external dimension when installing the board. (Unit: mm)
Option board dimension
39.3
22
E6581319