Table of Contents
Advertisement
A screen similar to the following displays:
3.
In the Service Name field, enter a descriptive name.
4.
In the Protocol list, select the protocol. Select TCP, UDP, or TCP/UDP.
If you are not sure, select TCP/UDP.
5.
In the External Starting Port field, enter the beginning port number.
•
If the application uses a single port, enter the same port number in the External
Ending Port field.
•
If the application uses a range of ports, enter the ending port number of the range in
the External Ending Port field.
6.
If the internal port numbers are the same as the external port numbers, select the Use the
same port range for Internal port check box.
If they are not, use the Internal Starting Port and Internal Ending Port fields to enter the
port numbers.
7.
In the Internal IP Address field, enter the IP address of your local computer that provides this
service.
You can also select a radio button for one of the devices in the list of attached devices to
automatically place the IP address of the selected device in the Internal IP Address field.
8.
Click the Apply button.
The service is added to the table on the Port Forwarding / Port Triggering screen.
N450 Wireless Router WNR2500
Advanced Settings
92
Advertisement
Table of Contents
