NETGEAR N600 WNDR3400v2 User Manual page 111

Table 4. Factory default settings (continued)
Feature
Local network DHCP starting IP address
(LAN) continued
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
N600 Wireless Dual Band Router WNDR3400v2
Supplemental Information
111
Default behavior
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Enabled
See router label
Enabled
Enabled
*
Auto
United States in the US, otherwise varies by region
6 until region selected
Up to 300 Mbps
Best
Full
Disabled (bars all unsolicited requests)
Enabled (all)