Table of Contents
Advertisement
LIFTING
1.
Use a crane or lift to load and unload the machine. A
skilled crane operator is required to perform the job.
2.
When lifting the machine, check for any damaged or
loose bolts, lifting hooks, and shock mounts.
3.
Check any damaged or loose bolts in the guard frame to
avoid machine sliding off.
4.
Make sure that the machine is shut off before machine is
lifted.
5.
Use reliable cable for lifting.
6.
Always lift the machine vertically and keep the
machine away from workers and animals.
7.
Do not lift the machine higher than the required
height.
TRANSPORTING
1.
Always make sure that the machine is shut off while
being transported.
2.
Check that the fuel cap is properly closed and
tightened.
3.
When traveling long distances or on rugged terrain,
drain the fuel of the machine before transporting.
4.
T i e d o w n t h e m a c h i n e s e c u r e l y o n t h e
transportation so that it will not move or topple over.
MQ-MIKASA MDR-9D VIBRATORY ROLLER — OPERATION AND PARTS MANUAL — REV. #0 (12/17/03) — PAGE 23
MDR-9D — LIFTING/TRANSPORTING
Advertisement
Table of Contents
