Using The Control Panel; Aligning The Print Head; Using The Print Head Alignment Utility For Windows - Epson NPD4919-00 EN User Manual

User's Guide

Using the control panel

Follow the steps below to clean the print head using the product control panel.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Enter Setup mode from the Home menu.
C
Select Maintenance.
D
Select Head Cleaning.
E
Press x to clean the print head.

Aligning the Print Head

If you notice a misalignment of vertical lines or horizontal banding, you may be able to solve this problem by using the
Print Head Alignment utility in your printer driver or by using the product buttons.
Refer to the appropriate section below.
Note:
Do not press y to cancel printing while printing a test pattern with the Print Head Alignment utility.

Using the Print Head Alignment utility for Windows

Follow the steps below to align the print head using the Print Head Alignment utility.
A
Make sure that no warnings or errors are displayed on the LCD screen, and the output tray is ejected.
B
Make sure A4-size paper is loaded in the paper cassette.
C
Right-click the product icon on the taskbar, then select Print Head Alignment.
If the product icon does not appear, refer to the following section to add the icon.
"From the shortcut icon on the taskbar" on page 33
&
D
Follow the on-screen instructions to align the print head.
Maintaining Your Product and Software
92