Ink Bottle Specifications; Checking The Ink Level; Refilling The Ink Tank - Epson NPD4736-00 EN User Manual

User's Guide
❏ After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Store ink bottles in a cool, dark place.
❏ Store the ink bottles in the same environment as the product. When storing or transporting the ink bottle after
opening the sealed bottle, avoid temperature changes, impacts, shaking or tilting the bottle; otherwise ink may
leak even if you tighten the cap on the bottle. Be sure to keep the ink bottle upright when tightening the cap, and
take measures to prevent ink from leaking when you transport the bottle.

Ink bottle specifications

❏ Epson recommends using the ink bottle before the date printed on the package.
❏ Some ink is consumed in the initial charging. In order to produce high quality printouts, the print head in your
product will be fully charged with ink.
❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the
frequency of your prints and environmental conditions such as temperature.
❏ Although the ink bottles may contain recycled materials, this does not affect product function or performance.

Checking the Ink Level

To confirm the actual ink remaining, visually check the ink level in the product's ink tank.
c
Important:
If the ink level is below the lower limit on the ink tank, fill it to the upper line on the ink tank. Continued use of the
product when the ink level is below the lower limit on the tank could damage the product.

Refilling the Ink Tank

Ink can be refilled at any time.
A
Open the ink tank unit cover, and then remove the cap of the ink tank. After removing the cap, place it as shown
in the illustration below.
Refilling Ink
62