Installation Procedures; Lens; When Using Auto Iris Lens - Samsung SHC-373 User Manual

Installation Procedures

Lens

The lens is not supplied with this camera. Purchase a lens suitable for your
environment. This camera accepts the auto iris lens and both C-and CS-mount
lens.
Notes
• I t is recommended to use the DC type Auto Iris Lens to effectively enjoy the major
functions of this camera.
• K eep the lens surface clean, since if it is contaminated with dirt or fingerprints the
picture quality suffers.

When Using Auto Iris Lens

1. Strip the insulation of the auto iris lens cable 8mm from the end.
2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
12
COLOR CCD CAMERA
approx. 8mm
approx. 2mm
User's Manual
Installation Procedures
3. Remove the cover of the auto iris lens connector plug and solder the lens cable to
the connector pin of the plug.
• For a Video Drive Lens
Pin 1: Red (Power)
Pin 2: NC
Pin 3: White (Video Signal)
Pin 4: Black (Ground)
No. 3 Pin
No. 1 Pin
No. 4 Pin
No. 2 Pin
4. Fit the cover of the auto iris lens connector
plug, remove the protective glass cover
from the front of the camera, and fasten
the auto iris lens by turning it clockwise.
5. Set focus of camera using Back Focus Control
Lever of camera side after combining Auto
Iris lens.
Back Focus Control Lever
COLOR CCD CAMERA
• For a DC Drive Lens
Pin 1: Damping -
Pin 2: Damping +
Pin 3: Drive +
Pin 4: Drive -
Lens cable
connector
13
User's Manual